To manually configure your personal device to connect to the RRC wireless network, follow these steps:

  1. Click the Start menu, and then click Control Panel.
    start_menu
  2. Click Network and Sharing Center.
    network_share_7
  3. Under Change your network settings, click the Set up a new connection or network link.
    set_up_netwk_7
  4. On the Set up a new connection or network menu, click Manually connect to a wireless network, and then click Next.
    manually_cnct_7
  5. On the Manually connect to a wireless network menu, complete the fields as follows:
    • In the Network name field, enter RRCWireless (case sensitive).
    • In the Security type field, click WPA2‑Enterprise in the drop‑down menu.
    • In the Encryption type field, click AES in the drop‑down menu.
    • Select the Start this connection automatically check box, and then click Next.

    manual_connect_fields_7

  6. On the Manually connect to a wireless network menu, click Change connection settings.
    chng_cnct_set_7
  7. On the RRCWireless Wireless Network Properties menu, on the Security tab, in the Choose a network authentication method drop‑down menu, click Microsoft: Protected EAP (PEAP), and then click Settings.
    wireless_prop_box_7
  8. On the Protected EAP Properties menu, complete the following steps:
    • Under When connecting, select the Validate server certificate check box.
    • Clear the Connect to these servers check box.
    • Under Trusted Root Certification Authorities, scroll down and select the Entrust.net Certification Authority (2048) check box.

      NOTE: If you do not have the Entrust.net Certification Authority (2048) check box, clear the Validate server certificate check box.
    • Under Select Authentication Method, clear the Enable Fast Reconnect check box, and then click Configure.

    protect_eap_prop_7

  9. On the EAP MSCHAPv2 Properties menu, clear the Automatically use my Windows logon name and password (and domain if any) check box, click OK to return to the Protected EAP Properties menu, and click OK to return to the RRCWireless Wireless Network Properties menu.
    auto_cnct_7
  10. On the RRCWireless Wireless Network Properties menu, on the Security tab, click Advanced settings.
    wireless_prop_7
  11. On the Advanced settings menu, on the 802.1X settings tab, complete the following steps:
    • Select the Specify authentication mode check box.
    • Click User authentication in the drop‑down menu.
    • Click Save credentials.

    adv_set_7

  12. Enter your College User name and Password, click OK to return to the Advanced settings menu, click OK to return to the RRCWireless Wireless Network Properties menu, click OK, and then click Close. Your device is now configured.

    NOTE: Enter the same User name and Password that you use to access the RRC network.
    save_cred_7
  13. Refer to the Connect to wireless network – Windows 7 webpage for instructions on connecting to the network.

← Back to Help Resources